Install Windshield - AR67.10-P-1503-01P
WARNING: This page is about a different car, the 2023 Mercedes-Benz C300, 2022 Mercedes-Benz C300, 2021 Mercedes-Benz C300, 2020 Mercedes-Benz C300, and 2019 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.
Model 117, 118, 156, 169, 171, 172.4, 176, 177, 203, 205, 207, 209, 211.0/2/6, 212, 213, 217, 218, 222, 230.4, 231, 238, 242,
243, 245.2, 246, 247, 253, 292, 293, 414.700
Model 463 as of model year 2019
| Notes on safety-relevant components | Model 117, 118, 156, 169, 171, 172.4, 176, 177, 203, 205, 207, 209, 211.0/2/6, 212, 213, 217, 218, 222, 230.4, 231, 238, 242, 243, 245.2, 246, 247, 253, 292 | AH00.00-Z-0019-01A |
- Open side window in driver door.
The side window must remain open during the curing time of the adhesive material.
Otherwise, back pressure will occur when closing a door, which presses the windshield (1) outward.
- Position both cup suction tools on outside of windshield (1).
- Together with a helper, center windshield (1) above windshield cutout in body flange and position congruent with tape strips (arrows).
- Position windshield (1) and press on until it rests on the rubber window spacers or the sealing lip.
Install windshield (1) within 10 min of applying adhesive material. Adhesion of adhesive material is otherwise impaired.
Observe the manufacturer's specifications for the curing time of the adhesive material.
Illustrated on model 169