Remove/Install Glove Compartment - AR68.10-P-1400LW

WARNING: This page is about a different car, the 2023 Mercedes-Benz C300, 2022 Mercedes-Benz C300, 2021 Mercedes-Benz C300, 2020 Mercedes-Benz C300, and 2019 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.

Model 205

Model 253 Model 293

MODIFICATION NOTES

28.02.2019

Special tool replaced.

Operation step 2

Fig 1: Glove Compartment Components Location - Model 205; Shown Except Code P21

Courtesy of MERCEDES-BENZ USA

Shown on model 205 except code P21 (Air quality package)

	Remove/install
1	Remove cover below the instrument panel on the front passenger side.	Model 293	AR68.10-P-1502EQ
		Model 205, 253	AR68.10-P-1520LW
2	Remove instrument panel cover (2).	Long wedge	Fig 2
3	Remove screws (4) at the bottom from the glove compartment (1).
4	Open glove compartment (1).
5	Remove flacon from the odor generator.	Model 205, 253, 293 with code P21 (Air quality package)
6	Remove screw/bolts (3).
7	Pull glove compartment (1) out in the direction of the arrow until the electrical connector (5) is accessible.	Push guides (6) of glove compartment (1) into instrument panel.
8	Disconnect electrical connector and hose from the odor generator.	Model 205, 253, 293 with code P21 (Air quality package)
9	Disconnect electrical connector (5) and remove glove compartment (1).	The number can vary according to the equipment.
10	Install in the reverse order

Fig 2: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA