Remove/Install Center Console - AR68.20-P-2000LW

WARNING: This page is about a different car, the 2023 Mercedes-Benz C300, 2022 Mercedes-Benz C300, 2021 Mercedes-Benz C300, 2020 Mercedes-Benz C300, and 2019 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.

Model 205 with transmission 722, 724, 725

Fig 1: Center Console Components Location - Model 205; Shown With Code 386

Courtesy of MERCEDES-BENZ USA

Shown on model 205.0 with code 386 (Comfort telephony)

	Remove/install
1	Remove center console cover (2)		AR68.20-P-2350LW
2	Remove rear center console covering (3)		AR68.20-P-2358LW
3	Disconnect electrical connector (4) and unclip from center console (1)	The number can vary according to the equipment.
4	Disconnect electrical connection (5)	The number can vary according to the equipment.
5	Unclip electrical sockets (6, 7) from center console (1)	The number can vary according to the equipment.
6	Unclip wiring harness from center console (1) (arrows A)
7	Lift paneling (9) in armrest stowage compartment and lay down to side
8	Unscrew nuts (10)
9	Remove screws (13)
10	Remove bolt (8)
11	Disconnect electrical connections (11, 12)	Model 205 with transmission 722, 724, 725 with code 386 (Comfort telephony)
12	Lift center console (1) at rear (arrow B) and move out of instrument panel (arrow C) toward rear	Ensure that air duct is seated correctly on air conditioning housing.
13	Install in the reverse order