LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2020 >> GLE450 >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Interior Equipment - 213 Chassis) >> Testing & Repair >> Remove/Install Paneling On A-Pillar - AR68.30-P-4050LW

Remove/Install Paneling On A-Pillar - AR68.30-P-4050LW

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2023 Mercedes-Benz E63 S AMG, 2023 Mercedes-Benz E53 AMG, 2023 Mercedes-Benz E350, 2022 Mercedes-Benz E53 AMG, and 2022 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.

Model 205 

Model 213 

Model 238.4 

Model 253 

Model 293 

MODIFICATION NOTES

28.02.2019 Special tool assembly wedge replaced by special tool long wedge. Operation Step 3 AR68.30-P-4050-03LW
  Notes on safety-relevant components   AH00.00-Z-0019-01A
REMOVINGINSTALLING Remove/install     
1 Completely open soft top. Model 205.4, 238.4  
2 Remove sun visor Model 205.4 AR68.60-P-5480NKB 
    Model 238.4 AR68.60-P-5480LWO
3 Remove A-pillar trim. Model 205.4, 238.4 AR68.30-P-4050-03LW
    Model 205.0/1/2/3, 213, 253, 293 AR68.30-P-4050-03LWA 
    SPECIAL TOOL Long wedge Fig 1
    SPECIAL TOOL Model 205.0/1/2/3, 213, 253, 293 Clip remover Fig 2
4 Install in the reverse order    
Fig 1: Identifying Long Wedge (115 589 03 59 00)
G07070400Courtesy of MERCEDES-BENZ USA
Fig 2: Identifying Clip Remover (452 589 01 63 00)
G07304504Courtesy of MERCEDES-BENZ USA