Remove/Install Multimedia Connection Unit In Center Console - AR82.60-P-1037ME

Model 167 

Courtesy of MERCEDES-BENZ USA

Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).
2	Open armrest of center console.
3	Insert removal fixtures into openings (arrows) of multimedia connection unit (A90/5).	Removal assembly	Fig 1
4	Pull multimedia connection unit (A90/5) with removal fixtures far enough out of center console until electrical connectors (1) are accessible.	Do not crush or kink or subject electric lines to tension. This will result in damage to the electric lines and can impair their function. The multimedia connection unit (A90/5) must latch audibly into place on both sides.
		Removal assembly	Fig 1
5	Release and disconnect electrical connections (1).	The number of electrical connectors (1) varies depending on the vehicle equipment.
6	Remove removal fixture from multimedia connection unit (A90/5).	Removal assembly	Fig 1
7	Install in the reverse order

Fig 1: Identifying Removal Assembly (000 589 88 63 00)

Courtesy of MERCEDES-BENZ USA