LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2020 >> GLE450 >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Interior Equipment -- 167 Chassis >> Testing & Repair >> Remove/Install Spare Tire Well Panel >> Remove/Install Spare Tire Well Panel - AR68.30-P-4620ME

Remove/Install Spare Tire Well Panel - AR68.30-P-4620ME

Model 167.1 except code 847 (3rd seat row) 

G15038589Courtesy of MERCEDES-BENZ USA
WARNING Risk of injury  caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. No parts of the body or limbs should be within the operating area when the components are moving. AS00.00-Z-0011-01A
  Notes on HANDS-FREE ACCESS   AH80.61-P-0001-01A
REMOVINGINSTALLING Remove/install     
1 Open tailgate.    
2 Remove luggage security in the load compartment. Model 167.1 with code 942 (EASY-PACK load securing kit except code 847 (3rd seat row)
Model 167.1
with code U40 (Safety net for luggage cover) except code 847 (3rd seat row)
 
3 Fold load compartment floor upwards and fix in place.    
4 Remove rear-end center-section trim.   AR68.30-P-4786ME 
5 Remove stowage tray (1). Model 167.1
with code 669 (Spare tire on steel rim)
with code 811 (High-End sound system)
except code 847 (3rd seat row)
Model 167.1
with code 669 (Spare tire on steel rim)
with code 97B (Engine noise reduction via speakers (EOC))
except code 847 (3rd seat row)
Model 167.1
with code 669 (Spare tire on steel rim)
with code U68 (Active engine sound generator)
except code 847 (3rd seat row)
Model 167.1
with code 690 (Collapsible spare wheel)
with code 811 (High-End sound system)
except code 847 (3rd seat row)
Model 167.1
with code 690 (Collapsible spare wheel)
with code 97B (Engine noise reduction via speakers (EOC))
except code 847 (3rd seat row)
Model 167.1
with code 690 (Collapsible spare wheel)
with code U68 (Active engine sound generator)
except code 847 (3rd seat row)
 
6 Remove cover panels (2).    
7 Remove stowage tray (3) with vehicle tool kit.    
8 Remove expansion rivets (4). IMPORTANT The number of expansion rivets (4) varies depending on the vehicle equipment.  
    SPECIAL TOOL Dismantling tool Fig 1
9 Remove spare wheel well trim (5).    
10 Install in the reverse order.    
Fig 1: Identifying Dismantling Tool (000 589 95 63 00)
G13659648Courtesy of MERCEDES-BENZ USA