Bleed Brake System - AR42.10-P-0010ME
Model 167
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | AS42.50-Z-0001-01A | |
| Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Topical note | Notes on handling, transport and storage of composite brake disks | AH42.10-P-9406-12LF | |
| Topical note | Notes on repairs to brake system | AH42.00-P-0003-01A | |
| Topical note | Brake fluid notes | AH42.50-P-0001-01A | |
| Topical note | Notes on safety-relevant components | AH00.00-Z-0019-01A | |
| Remove | |||
| 1 | Remove cover above left suspension strut tower. | ||
| 2 | Clean area around cap (1) of brake fluid reservoir (2). | Assembly cleaner | *BR00.45-Z-1028-04A |
| 3 | Unscrew cap (1) of brake fluid reservoir (2). | ||
| 4 | Remove rear wheel and tire assemblies. | AR40.10-P-1102ME | |
| Bleeding | |||
| 5 | Fill brake fluid reservoir (2) with new brake fluid up to maximum mark. | ||
| General brake fluid | BB00.40-P-0330-01A | ||
| Brake fluids (DOT 4 plus) | BB00.40-P-0331-00A | ||
| 6 | Connect filling unit (01) at brake fluid reservoir (2). | ||
| 000 588 01 82 00 Filling unit | WS25.00-P-0016B | ||
| 7 | Switch on filling unit (01). | ||
| 000 588 01 82 00 Filling unit | WS25.00-P-0016B | ||
| 8 | Bleed the system. | AR42.10-P-0010-02MFA | |
| 000 588 01 82 00 Filling unit | WS25.00-P-0016B | ||
| *BA42.10-P-1001-12L | |||
| *BA42.10-P-1001-10L | |||
| 9 | Switch off filling unit (01) and disconnect from brake fluid reservoir (2). | ||
| 000 588 01 82 00 Filling unit | WS25.00-P-0016B | ||
| Check | |||
| 10 | Check brake system for leaks. | AR42.10-P-0100-01ME | |
| 11 | Correct fluid level in brake fluid reservoir (2). | ||
| AP42.10-P-4210E | |||
| Install | |||
| 12 | Install rear wheel and tire assemblies. | AR40.10-P-1102ME | |
| 13 | Seal brake fluid reservoir (2) with cap (1). | ||
| 14 | Install cover over left suspension strut tower. |
FRONT AXLE BRAKE CALIPER
| Number | Designation | Model 167 | |
|---|---|---|---|
| BA42.10-P-1001-10L | Bleed screw at brake caliper | Nm | 18 |
REAR AXLE BRAKE CALIPER
| Number | Designation | Model 167 | |
|---|---|---|---|
| BA42.10-P-1001-12L | Bleed screw to brake caliper | Nm | 11 |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1028-04A | Assembly cleaner | A 000 986 56 01 |