Front Area With Front Reinforcement Torque Specifications - BA62.30-P-1000-02I
Model 166, 167, 292
FROND END WITH REINFORCEMENT
| Number | Designation | Model 166 | Model 167 | ||
|---|---|---|---|---|---|
| BA62.30-P-1001-02I | Screw/nut, impact absorber to longitudinal member/crossmember | Nm | 55 | 55 | |
| BA62.30-P-1002-02I | Screw/bolt, cross strut to impact absorber | Nm | 25 | 24 | |
| BA62.30-P-1003-02I | Screw/bolt, crossmember to longitudinal member on outside | Nm | 10 | 8 | |
| BA62.30-P-1004-02I | Screw, impact absorber/front crossmember to top crossmember | Nm | 20 | 6 | |
| BA62.30-P-1005-02I | Screw, support to suspension strut tower/firewall | M10 | Nm | 56 | 31 |
| BA62.30-P-1006-02I | Nut/screw, lower crossmember to radiator unit mounting support | M10 | Nm | - | 55 |
| BA62.30-P-1007-02I | Screw, radiator unit mounting support to front crossmember | M6 | Nm | - | 10 |
| BA62.30-P-1008-02I | Screw, radiator unit at front top | Nm | - | 8 | |
| BA62.30-P-1009-02I | Screw, bracket to mounting support of radiator unit at front bottom | M6 | Nm | - | 8 |
| BA62.30-P-1010-02I | Nut/screw, hood mounting bracket | M6 | Nm | - | 10 |
| BA62.30-P-1011-02I | Nut/screw, strut to crossmember/impact absorber | M8 | Nm | - | 24 |
| BA62.30-P-1012-02I | Screw, upper engine compartment partition to lower engine compartment partition | - | 4 | ||
FROND END WITH REINFORCEMENT
| Number | Designation | Model 292 | ||
|---|---|---|---|---|
| BA62.30-P-1001-02I | Screw/nut, impact absorber to longitudinal member/crossmember | Nm | 55 | |
| BA62.30-P-1002-02I | Screw/bolt, cross strut to impact absorber | Nm | 25 | |
| BA62.30-P-1003-02I | Screw/bolt, crossmember to longitudinal member on outside | Nm | 10 | |
| BA62.30-P-1004-02I | Screw, impact absorber/front crossmember to top crossmember | Nm | 20 | |
| BA62.30-P-1005-02I | Screw, support to suspension strut tower/firewall | M10 | Nm | 56 |
| BA62.30-P-1006-02I | Nut/screw, lower crossmember to radiator unit mounting support | M10 | Nm | - |
| BA62.30-P-1007-02I | Screw, radiator unit mounting support to front crossmember | M6 | Nm | - |
| BA62.30-P-1008-02I | Screw, radiator unit at front top | Nm | - | |
| BA62.30-P-1009-02I | Screw, bracket to mounting support of radiator unit at front bottom | M6 | Nm | - |
| BA62.30-P-1010-02I | Nut/screw, hood mounting bracket | M6 | Nm | - |
| BA62.30-P-1011-02I | Nut/screw, strut to crossmember/impact absorber | M8 | Nm | - |
| BA62.30-P-1012-02I | Screw, upper engine compartment partition to lower engine compartment partition | - | ||