LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2020 >> GLC350e >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Battery Management Systems >> Electrical System, Equipment & Instruments - 253 Chassis 4 Of 9 >> Testing & Repair >> Remove/Install Battery Sensor - AR54.10-P-0002LW

Remove/Install Battery Sensor - AR54.10-P-0002LW

Model 205 (except 205.012/047/147/212/247) 

Model 213 

except code B01 (48V technology) 

Model 238, 253, 293 

MODIFICATION NOTES

12.07.2021 New operation step inserted. Step 5  

Shown on model 213.### 1# 

Fig 1: Battery Sensor Components Location - Model 253 (Shown On Model 213.### 1#)
G14201271DANGERREMOVINGINSTALLINGIMPORTANTTORQUE SPECIFICATIONTORQUE SPECIFICATIONTORQUE SPECIFICATIONTORQUE SPECIFICATIONREFER TO SELF-DIAGNOSTIC SYSTEMSREFER TO SELF-DIAGNOSTIC SYSTEMSREFER TO SELF-DIAGNOSTIC SYSTEMSCourtesy of MERCEDES-BENZ USA
DANGER Risk of fire  /risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning  caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death  due to voltage U >= 30 V AC and U >= 60 V DC. No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers. AS54.10-Z-0001-01A 
Notice  Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
Notice  Notes on battery   AH54.10-P-0001-01A
REMOVINGINSTALLING Remove/install     
1 Disconnect ground line (1) from on-board electrical system battery (G1). Model 293 AR54.10-P-0003EQ
    Model 238 AR54.10-P-0003LWO
    Model 205 (except 205.012/047/147/212/247)
Model 213
except code B01 (48V technology)
Model 253
AR54.10-P-0003LW 
2 Release and disconnect electrical connector (2).    
3 Detach nut (3) and remove ground line (1) with battery sensor (B95). IMPORTANT The ground line (1) and the battery sensor (B95) are one component and cannot be replaced individually.
TORQUE SPECIFICATION Model 293Right on-board electrical system battery ground point
*BA00.19-P-1002-02F 
    TORQUE SPECIFICATION Model 238Battery ground point *BA00.19-P-1034-02B 
    TORQUE SPECIFICATION Model 213
except code B01 (48V technology) Battery ground point
*BA00.19-P-1035-02A 
    TORQUE SPECIFICATION Model 205 (except 205.012/047/147/212/247)
as of model year 2019
Model 205 (except 205.012/047/147/212/247)
up to model year 2019
Model 253Battery ground point
*BA00.19-P-1010-01E 
4 Install in the reverse order.    
5 Commission battery sensor (B95). When replacing battery sensor (B95).  
REFER TO SELF-DIAGNOSTIC SYSTEMS   Model 205 (except 205.012/047/147/212/247)
except code B01 (48V technology)
Model 213
except code B01 (48V technology)
Model 253
AD00.00-P-2000-04B
REFER TO SELF-DIAGNOSTIC SYSTEMS   Model 238 AD00.00-P-2000-06LWO
REFER TO SELF-DIAGNOSTIC SYSTEMS   Model 293 AD00.00-P-2000-06FR
GROUND POINTS

Number Designation Model 293
BA00.19-P-1002-02F Right on-board electrical system battery ground point W10 Nm 20
GROUND POINTS

Number Designation Model 205 up to model year 2019 Model 205 as of model year 2019
BA00.19-P-1010-01E Battery ground point W10 Nm 20 20
GROUND POINTS

Number Designation Model 253 (except 253.99) as of model year 2020 Model 253 (except 253.99) up to model year 2020
BA00.19-P-1010-01E Battery ground point W10 Nm 20 20
GROUND POINTS

Number Designation Model 253.99
BA00.19-P-1010-01E Battery ground point W10 Nm 20
GROUND POINTS

Number Designation Model 238
BA00.19-P-1034-02B Battery ground point W10 Nm 16
GROUND POINTS

Number Designation Model 213 up to model year 2020 Model 213 as of model year 2021
BA00.19-P-1035-02A Battery ground point W10 Nm 16 16