Wiring Diagram For Camera Cover Control Unit - PE54.21-P-2142FBA
Model 205
up to model year 2019
with code 218 (Rear view camera)
with code 501 (360° camera)
Control unit N42
Model 253 (except 253.99)
up to model year 2020
with code 218 (Rear view camera)
with code 501 (360° camera)
Control unit N42
| Wiring diagram for camera cover control unit | PE54.21-P-2142-97FBA | ||
| Abbreviations of signal and circuit designations for wiring diagrams | OV00.01-P-1001-28FBA | ||
| Use of wiring diagrams | OV00.01-P-1901-03FBA | ||
| Search aid for all electrical components | OV00.01-P-1909FBA | ||
| Location and assignment of line and plug connectors | GF00.19-P-1000FBA | ||
| Location and assignment of ground points | GF00.19-P-2000FBA | ||
| Location and assignment of Z connector sleeves (wiring and plug connectors in wiring harness) | GF00.19-P-3000FBA |