Remove/Install Augmented Reality Camera - AR54.30-P-0004LWX
Model 253 (except 253.992/993) as of model year 2020 with code 21U (Video recording function Dash cam
Model 253 (except 253.992/993) as of model year 2020 with code U19 (Augmented reality video)
Model 293 with code 21U (Video recording function Dash cam
Model 293 with code U19 (Augmented reality video)
Fig 1: Augmented Reality Camera Components Location - Model 253 (Except 253.992/993) As Of Model Year 2020 With Code 21U; U19 (With Code U19 Shown)
Shown on model 253 as of model year 2020 with code U19 (Augmented reality)
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
| 2 | Unclip and remove cover (1) (arrows). | ||
| 3 | Release and disconnect electrical connector from augmented reality camera (B84/14). | ||
| 4 | Unhook spring clip (2) and remove augmented reality camera (B84/14). | ||
| 5 | Install in the reverse order. | ||
| 6 | Perform commissioning of augmented reality camera (B84/14). | If the augmented reality camera (B84/14) is replaced. | |
| Model 293 with code 21U (Video recording function Dash cam Model 293 with code U19 (Augmented reality video) |
AD00.00-P-2000-06FR | ||
| Model 253 (except 253.992/993) as of model year 2020 with code 21U (Video recording function Dash cam Model 253 (except 253.992/993) as of model year 2020 with code U19 (Augmented reality video) |
AD00.00-P-2000-04B | ||
| 000 588 00 23 00 Adjusting gauge | WS82.00-P-0028B | ||
| 000 588 11 21 00 Adjustment device | WS82.00-P-0151B | ||
| 7 | Perform calibration of augmented reality camera (B84/14). | If the head unit (A26/17) was replaced or if the camera position was changed (e.g. lens replacement, removal of augmented reality camera (B84/14)). | |
| Model 293 with code 21U (Video recording function Dash cam | AD00.00-P-2000-06FR | ||
| Model 293 with code U19 (Augmented reality video) Model 253 (except 253.992/993) as of model year 2020 with code 21U (Video recording function Dash cam |
AD00.00-P-2000-04B | ||
| 000 588 00 23 00 Adjusting gauge | Model 253 (except 253.992/993) as of model year 2020 with code U19 (Augmented reality video) | WS82.00-P-0028B | |
| 000 588 11 21 00 Adjustment device | WS82.00-P-0151B |