253 588 24 23 00 Data Specification - WS60.00-P-0324K

Model 253.9 with code 9O1 (Fuel cell pre-installation)

Use in FG 60/61/62/63/64/Set B/K

Purpose:

Vehicle-specific set-up plan, straightener scope and portal straightener scope for testing and fixing the structural components in place during body repair work according to the Mercedes-Benz standard.

NOTE: The analysis and attachment of all structural components of the body is performed using only the repair method described in WIS.

Technical Note:

Only in combination with 000 588 04 23 00 body straightening system.

Procurement information:

Recommended workshop equipment and information about the manufacturers can be found in the WS document (see below).

Courtesy of MERCEDES-BENZ USA

Manufacturer

CELETTE FRANCE SAS

3, avenue Marcelin Berthelot

38200 Vienne

France

http://www.celette.com

Straightener supplementary set: 7253.5A04
NOTE: Only in combination with 7205.5C + 7253.5A01
Basic portal straightening set: 7253.8A