000 588 33 23 00 Straightening Bench - WS60.00-P-0244K

Model 117, 156, 164, 166, 169, 171, 172, 176, 190, 197.3/4, 199.3/4, 204, 205.0/1/2/3/4, 207, 212, 213, 216, 217.3, 218, 219, 221, 222, 230, 231, 238, 240, 242, 245, 246, 251, 253 

Model 414, 415, 447, 639 

Model 451, 453, 454 

Model 460, 461, 463 

Model 901, 902, 903, 904, 905, 906 

	000 588 22 23 00 Straightening bench accessories	Model 117, 156, 176, 190, 197.3/4, 204.9, 205.0/1/2, 212, 217.3, 218, 222, 231, 240, 242, 246, 453	WS60.00-P-0060K
	000 588 23 23 00 Straightening bench accessories	Model 117, 156, 166, 176, 190, 197.3/4, 204.9, 205, 207, 212, 213, 217.3, 218, 219, 222, 231, 240, 242, 246, 253, 453	WS60.00-P-0061K .
	000 588 08 23 00 Data sheet	Model 117, 156, 164, 166, 169, 171, 172, 176, 190, 197.3/4, 199.3/4, 204, 205.0/1/2/3/4, 207, 212, 213, 216, 217.3, 218, 219, 221, 222, 230, 231, 238, 240, 242, 245, 246, 251, 253 Model 414, 415, 447, 639 Model 451, 453, 454 Model 460, 461, 463 Model 901, 902, 903, 904, 905, 906	WS60.00-P-0208K .

Use in FG 60/61/62/63/64/Set K 

Purpose: 

Straightening bench for measuring and repairing vehicle bodies.

Test equipment category CAT_A.

Reference information: 

Recommended workshop equipment and information about the manufacturers can be found in the WS document (see below).

Courtesy of MERCEDES-BENZ USA

Manufacturer 

CELETTE FRANCE SAS 

3, avenue Marcelin Berthelot

38200 Vienne

France

http://www.celette.com 

• Type/model: Sevenne XL Article no.:9175.022