Remove/Install Door Frame Seal - AR72.10-P-2120LW

Model 205.0/1/2 

Model 213 

Model 253 

Model 293 

Courtesy of MERCEDES-BENZ USA

Shown on Model 205.0 except code 810 (Sound-System) 

	Risk of injury  caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
	Remove
1	Switch off ignition and store transmitter key outside of transmission range (min. 2 m).
2	Remove mirror triangle cover (3).	Model 205.0/1/2, 253, 293 with code 810 (Sound system) Model 205.0/1/2, 253, 293 with code 853 ("Midline" sound system) Model 213 Allow mirror triangle cover (3) to hang down with connected electric line.	AR72.10-P-3001LW
3	Remove window frame lining (4).	The window frame lining (4) is fastened positively to the window frame and additionally clipped into the window frame with a retaining clip (4.1) in the area of the mirror triangle cover (3).
		Long wedge	Fig 1
4	Release left Front door control unit (N69/1) and right Front door control unit (N69/2) from the Front door (2).	Model 205.0 except code 700 (Technology Local Content China)
5	Detach sealing frame (5) from the Front door (2).
6	Remove adhesive residue from Front door (2) using a surface conditioning disk and clean bonding surface.
Topical note	Notes on removing adhesive residues and foils on paint and metal surfaces with surface conditioning disks	The bonding surface must be free of dust and grease. Use surface conditioning disk with a diameter of 100 mm.	AH00.00-P-0013-01AK
		Cleaner	*BR00.45-Z-1025-04A
	Install
7	Glue sealing frame (5) onto the Front door (2).	Model 205.0 except code 700 (Technology Local Content China)	AR72.10-P-2120-05LW
		Model 205.0 with code 700 (Technology Local Content China) Model 205.1/2, 213, 253, 293	AR72.10-P-2120-05LWA
		Roller	Fig 2
		Model 205.0 except code 700 (Technology Local Content China) Template	Fig 3
8	Fasten left Front door control unit (N69/1) and right Front door control unit (N69/2) to the Front door (2).	Model 205.0 except code 700 (Technology Local Content China)
9	Attach window frame lining (4) to the window frame.
10	Install mirror triangle cover (3).		AR72.10-P-3001LW

Fig 1: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Roller (168 589 05 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Template (205 589 01 23 00)

Courtesy of MERCEDES-BENZ USA