Remove/Install Glove Compartment - AR68.10-P-1400LW

Model 205 

Model 253 

Model 293 

Courtesy of MERCEDES-BENZ USA

Shown on model 205 except code P21 (Air quality package) 

	Remove/install
1	Remove cover below the instrument panel on the front passenger side.	Model 293	AR68.10-P-1502EQ
		Model 205, 253	AR68.10-P-1520LW
2	Remove instrument panel cover (2).	Long wedge	Fig 1
3	Remove screws (4) at the bottom from the glove compartment (1).
4	Open glove compartment (1).
5	Remove flacon from the odor generator.	Model 205, 253, 293 with code P21 (Air quality package)
6	Remove screw/bolts (3).
7	Pull glove compartment (1) out in the direction of the arrow until the electrical connector (5) is accessible.	Push guides (6) of glove compartment (1) into instrument panel.
8	Disconnect electrical connector and hose from the odor generator.	Model 205, 253, 293 with code P21 (Air quality package)
9	Disconnect electrical connector (5) and remove glove compartment (1).	The number can vary according to the equipment.
10	Install in the reverse order

Fig 1: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA