Blind Spot Assist Wiring Diagram - PE54.71-P-2100-97IDA
Model 247
with code 234 (Blind Spot Monitoring)
except code 233 (DRIVE PILOT)
Radar sensor B92/6, B92/11
| Code: | Designation: | Position: |
|---|---|---|
| AO | Use of wiring diagrams | 48L |
| B92/11 | Left outer rear integrated radar sensor | 20A |
| B92/11 | Left outer rear integrated radar sensor | 37J |
| B92/11 | Left outer rear integrated radar sensor | 33A |
| B92/11 | Left outer rear integrated radar sensor | 46A |
| B92/6 | Right outer rear integrated radar sensor | 4A |
| B92/6 | Right outer rear integrated radar sensor | 12A |
| B92/6 | Right outer rear integrated radar sensor | 32A |
| B92/6 | Right outer rear integrated radar sensor | 37G |
| B92/6 | Right outer rear integrated radar sensor | 45A |
| CAN PER | Peripherals CAN | 21K |
| N10 | Central control module | 7L |
| W6 | Left wheel arch trunk ground point | 10K |
| X30/27 | Peripherals CAN (CAN PER) potential distributor electrical connector | 21L |
| Z36/53z1 | Periphery CAN (CAN PER) low connector sleeve | 20F |
| Z36/54z1 | Periphery CAN (CAN PER) high connector sleeve | 11G |
| Z3z1 | Tml. 15 connector sleeve | 5F |
| Z6/56z1 | Circuit 31 connector sleeve | 9F |