Remove/Install Parktronic System (PTS) Sensors In Front Bumper - AR54.65-P-0001MFA
Model 118, 177, 247
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Remove front bumper (1) | AR88.20-P-2000MFA | |
| 2 | Release and disconnect electrical connectors (2) | ||
| 3 | Release locks (3) and remove front parking system distance sensors (B8/1, B8/2, B8/3, B8/4, B8/5, B8/6) from front bumper (1) | ||
| Check | |||
| 4 | Check each seal of front parking system distance sensors (B8/1, B8/2, B8/3, B8/4, B8/5, B8/6) | In the event of complaints ↓ Replace corresponding seal. |
|
| 5 | Install in the reverse order |