Remove/Install Augmented Reality Camera - AR54.30-P-0004MFA

Model 118, 177, 243, 247 

with code 21U (Video recording function (Dashcam)) 

Model 118, 177, 243, 247 

with code U19 (Augmented reality video) 

Fig 1: Augmented Reality Camera Components Location - Model 247 With Code 21U; U19

Courtesy of MERCEDES-BENZ USA

Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).
2	Remove cover (1).		AR82.30-P-7801MFA
3	Release and disconnect electrical connectors (2).
4	Unhook spring clip (3) and remove augmented reality camera (B84/14).	Protect the lens against damage and fouling.
5	Install in the reverse order.
6.1	Perform commissioning of augmented reality camera (B84/14).	If the augmented reality camera (B84/14) was replaced.
			AD00.00-P-2000-06MFA
	000 588 00 23 00 Adjusting gauge		WS82.00-P-0028B
	000 588 11 21 00 Adjustment device		WS82.00-P-0151B
6.2	Calibrate augmented reality camera (B84/14).	If the head unit (A26/17) was replaced or if the camera position was changed (e.g. lens replacement, removal of augmented reality camera (B84/14)).
	000 588 00 23 00 Adjusting gauge		WS82.00-P-0028B
	000 588 11 21 00 Adjustment device		WS82.00-P-0151B
			AD00.00-P-2000-06MFA