202 589 04 43 00 Extraction Tool - WS35.00-P-0153C
Model 117, 124, 129, 140, 163, 164, 166, 168, 169, 170, 171, 172, 176, 190, 197, 201, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 213, 215, 216, 218, 219, 220, 221, 222, 230, 231, 238, 242, 245.20/23, 246, 251, 253, 257, 292, 414
Use in FG 35/33/Set C
Purpose:
Puller for wheel hub front axle and rear axle.
Plate for underlay when pressing out the elastomer bearing of the tension strut on models 205, 213, 238, 253 and 257.
NOTE:
Do not exceed the max. Torque of 50 Nm on the press spindle.
For FG 33:
Model 168: In combination with W 168 589 00 43 00 support plate.
Model 169, 242: In combination with W 202 589 04 43 06 plate.
| 202 589 04 43 06 Platte | Model 124, 129, 163, 164, 168, 169, 170, 190, 201, 202, 203, 204, 208, 209, 210, 221, 242, 245.20/23, 246, 251, 414 FG 33/Set C | WS33.00-P-0114-06C | |
| 202 589 04 43 07 Platte | Model 117, 124, 129, 163, 166, 170, 172, 176, 190, 201, 202, 203, 204, 205, 208, 209, 210, 213, 238, 242, 246, 253, 257 FG 33/35/Set C | WS35.00-P-0153-01C | |
| 202 589 04 43 12 Hanger | Model 117, 124, 129, 140, 163, 166, 170, 190, 201, 202, 203, 208, 210, 215, 220, 242, 246 FG 35/Set C | WS35.00-P-0153-02C | |
| 202 589 04 43 10 Press | Model 117, 124, 129, 140, 163, 166, 170, 172, 190, 201, 202, 203, 204, 207, 208, 210, 211, 212, 215, 216, 218, 219, 220, 221, 230, 231, 242, 246 FG 33/35/Set C | WS35.00-P-0153-03C | |
| 202 589 04 43 11 Pressure screw | Model 117, 124, 129, 140, 163, 166, 170, 190, 201, 202, 203, 208, 209, 210, 211, 215, 219, 220, 230, 242, 246 FG 33/35/Set C | WS35.00-P-0153-04C | |
| 202 589 04 43 03 Mandrel | Model 164, 166, 169, 190, 203, 204 FG 35/Set C | WS35.00-P-0153-05C |