Remove/Install Front Elastomer Bearing For Rear Axle Differential Mounting - AR35.10-P-0053MNE

Model 213.088/089/288/289 

Fig 1: Front Elastomer Bearing For Rear Axle Differential Mounting Components Location - Model 213.088/089/288/289

Courtesy of MERCEDES-BENZ USA

	Risk of injury  caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	Notes on repair work on suspension components		AH00.00-P-0100-01A
	Remove/install
1	Remove rear axle differential (50) from rear axle carrier (4)		AR35.31-P-0522MNE
2	Release bolts (5) and remove bearing bracket (6) from rear axle differential (50)	Bolt, rear axle differential to bearing bracket	*BA35.10-P-1007-01H
3	Clamp bearing bracket (6) into vise
4	Press elastomer bearing (10) out of bearing bracket (6)		AR35.10-P-0053-01MNE
		Hollow piston cylinder	Fig 6
		Extraction and installation tool	Fig 5
		Hand pump	Fig 4
		Hydraulic hose (complete)	Fig 3
		Extraction and insertion tool	Fig 2
5	Install in the reverse order

REAR AXLE CARRIER

Number	Designation		Model 213
BA35.10-P-1007-01H	Bolt, rear axle differential to bearing bracket	Nm	170

Fig 2: Identifying Extraction And Insertion Tool (204 589 01 43 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Hydraulic Hose (Complete) (652 589 00 33 23)

Courtesy of MERCEDES-BENZ USA

Fig 4: Identifying Hand Pump (652 589 00 33 21)

Courtesy of MERCEDES-BENZ USA

Fig 5: Identifying Extraction And Installation Tool (221 589 01 43 00)

Courtesy of MERCEDES-BENZ USA

Fig 6: Identifying Hollow Piston Cylinder (001 589 51 33 00)

Courtesy of MERCEDES-BENZ USA