Remove/Install Right Front Engine Mount - AR22.10-P-1105MND

Engine 276.8 in model 213, 238 

with code M005 (4MATIC) 

Courtesy of MERCEDES-BENZ USA

Fig 1: Right Front Engine Mount Component Location - Engine 276.8 In Model 213 With Code M005

Courtesy of MERCEDES-BENZ USA

	Risk of injury  . Moving parts can pinch, crush or, in extreme cases even sever extremities.	No parts of the body or limbs should be within the operating area of mechanical components when moving components.	AS00.00-Z-0009-01A
	Risk of injury  caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A
	Risk of injury  . Skin or eye injuries may result when handling hot or glowing objects.	Wear protective gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
	Notes on bolted connections with self tapping screws		AH00.00-P-0007-01SF
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	Remove/install
1	Remove engine with front axle carrier		AR01.10-P-2500MND
2	Fasten load tilter to engine with boom crane
	000 588 00 62 00 Load tilter		WS01.00-P-0102B
		Commercially available devices/tools  Boom crane
3	Remove screws/bolts (2) of heat shield (1), and remove heat shield (1) to side	Bolt, heat shield to engine support	*BA22.10-P-1003-02A
4	Raise engine slightly using boom crane and load tilter
	000 588 00 62 00 Load tilter		WS01.00-P-0102B
		Commercially available devices/tools  Boom crane
5	Remove screw/bolt (4)	Engine 276.8 in model 213 with code M005 (4MATIC) Bolt, front engine mount to engine support	*BA22.10-P-1001-03N
		Engine 276.8 in model 238 with code M005 (4MATIC) Bolt, front engine mount to engine support	*BA22.10-P-1001-03O
6	Remove screw/bolts (6)	Engine 276.8 in model 213 with code M005 (4MATIC) Bolt, front engine mount to front axle carrier	*BA22.10-P-1002-03N
		Engine 276.8 in model 238 with code M005 (4MATIC) Bolt, front engine mount to front axle carrier	*BA22.10-P-1002-03O
7	Raise engine, and remove engine mount (5) from front axle carrier	: Replace engine mounts in pairs only.
8	Install in the reverse order

ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)

Number	Designation				Model 213 with engine 256, 264, 274, 276, 642, 654, 656
BA22.10-P-1001-03N	Bolt, front engine mount to engine support	M10	Stage 1	Nm	50
			Stage 2	∠°	-

ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)

Number	Designation		Model 238 with code M005 (4MATIC)
BA22.10-P-1001-03O	Bolt, front engine mount to engine support	Nm	50

ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)

Number	Designation			Model 213 with engine 256, 264, 274, 276, 642, 654, 656
BA22.10-P-1002-03N	Bolt, front engine mount to front axle carrier	M8	Nm	30

ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)

Number	Designation		Model 238 with code M005 (4MATIC)
BA22.10-P-1002-03O	Bolt, front engine mount to front axle carrier	Nm	30

ENGINE SUPPORT (ENGINE SIDE)

Number	Designation		Engine 276
BA22.10-P-1003-02A	Bolt, heat shield to engine support	Nm	13