Remove/Install Rear Engine Support - AR22.10-P-4360OLC

Model 213 with engine 274, 642, 654 

Model 238 with engine 642, 654 

Shown on MODEL 213 without CODE M005 (4MATIC) 

Fig 1: Rear Engine Support Component Location - Model 213 With Engine 274 Without Code M005

Courtesy of MERCEDES-BENZ USA

Shown on MODEL 213 with CODE M005 (4MATIC) 

Fig 2: Rear Engine Support Component Location - Model 213 With Engine 274 With Code M005

Courtesy of MERCEDES-BENZ USA

	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
	Risk of injury.  Skin or eye injuries may result when handling hot or glowing objects.	Wear protective gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
	Notes on bolted connections with self tapping screws		AH00.00-P-0007-01SF
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	Remove/install
1	Remove center and rear section of lower engine compartment paneling		AR61.20-P-1105LWE
2	Support transmission (4)
	000 588 10 62 00 Support plate		WS26.00-P-3309B
	000 588 11 62 00 Major assembly mount		WS01.00-P-0092B
3.1	Remove Screw/bolt/bolts (1a)	Model 213 with engine 274, 642, 654 except code M005 (4MATIC) Model 238 with engine 654 except code M005 (4MATIC)
		Model 238 with engine 654 except code M005 (4MATIC) Rear engine mount to engine support	*BA22.10-P-1004-03O
		Model 213 with engine 274, 642, 654 except code M005 (4MATIC) Rear engine mount to engine support	*BA22.10-P-1004-03N
3.2	Unscrew nuts (1c)	Model 213 with engine 274, 642, 654 with code M005 (4MATIC) Model 238 with engine 642, 654 with code M005 (4MATIC)
		Model 238 with engine 642, 654 with code M005 (4MATIC) Rear engine mount to engine support	*BA22.10-P-1004-03O
		Model 213 with engine 274, 642, 654 with code M005 (4MATIC) Rear engine mount to engine support	*BA22.10-P-1004-03N
4	Remove screws (2a) and remove engine carrier (2)	Never Use an impact wrench/driver or compressed air tools for screwing in or unscrewing the screw/bolts (2a). It will damage the threads.
		Model 213 with engine 274, 642, 654Bolt, rear engine support to body	*BA22.10-P-1005-03N
		Model 238 with engine 642, 654 with code M005 (4MATIC) Model 238 with engine 654 except code M005 (4MATIC) Bolt, rear engine support to body	*BA22.10-P-1005-03O
5	Install in the reverse order