Remove/Install Rear Engine Support - AR22.10-P-4360MRD

Engine 264 in model 213, 238, 257 

Engine 274.9 in model 238 

Shown without code M005 (4MATIC) 

Fig 1: Rear Engine Support Component Location - Engine 264 In Model 213 Without Code M005

Courtesy of MERCEDES-BENZ USA

Shown with CODE M005 (4MATIC) 

Fig 2: Rear Engine Support Component Location - Engine 264 In Model 213 With Code M005

Courtesy of MERCEDES-BENZ USA

	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
	Risk of injury  . Skin or eye injuries may result when handling hot or glowing objects.	Wear protective gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	Notes on bolted connections with self tapping screws		AH00.00-P-0007-01SF
	Remove/install
1	Remove center and rear sections of lower engine compartment lining.	Model 257	AR61.20-P-1105FR
		Model 213, 238	AR61.20-P-1105LWE
2	Support transmission (4).
	000 588 11 62 00 Major assembly mount		WS01.00-P-0092B
	000 588 10 62 00 Support plate		WS26.00-P-3309B
3.1	Remove bolts (la).	Model 213, 238, 257 except code M005 (4MATIC)
		Engine 264 in model 213, 257 except code M005 (4MATIC) Rear engine mount to engine support	*BA22.10-P-1004-03N
		Engine 264 in model 238 except code M005 (4MATIC) Engine 274.9 in model 238 except code M005 (4MATIC) Rear engine mount to engine support	*BA22.10-P-1004-03O
3.2	Unscrew nuts (1c).	Model 213, 238, 257 with code M005 (4MATIC)
		Engine 264 in model 213, 257 with code M005 (4MATIC) Rear engine mount to engine support	*BA22.10-P-1004-03N
		Engine 264 in model 238 with code M005 (4MATIC) Engine 274.9 in model 238 with code M005 (4MATIC) Rear engine mount to engine support	*BA22.10-P-1004-03O
4	Remove screws (2a) and remove engine carrier (2).	Never use an impact wrench/driver or compressed air tools for unscrewing or screwing in the screw/bolts (2a). Otherwise, the threads will be damaged.
		Model 213, 257Bolt, rear engine support to body	*BA22.10-P-1005-03N
		Model 238 except code M005 (4MATIC) Bolt, rear engine support to body	*BA22.10-P-1005-03O
		Model 238 with code M005 (4MATIC) Bolt, rear engine support to body	*BA22.10-P-1005-03O
5	Install in the reverse order.