Remove/Install Rear Engine Mount - AR22.10-P-1160MNE
Engine 177 in model 213
with code M005 (4MATIC)
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. |
AS00.00-Z-0017-01A | |
| Risk of injury . Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | AS00.00-Z-0009-01A | |
| Notes on bolted connections with self tapping screws | AH00.00-P-0007-01SF | ||
| Notes on self-locking nuts and bolts | AH00.00-N-0001-01A | ||
| Remove/install | |||
| 1 | Remove engine support | AR22.10-P-4360MNE | |
| 2 | Remove screw/bolts (2) and remove engine mount (1) downwards | *BA22.10-P-1003-03N | |
| 3 | Install in the reverse order |
ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)
| Number | Designation | Model 213 with engine 177 | ||
|---|---|---|---|---|
| BA22.10-P-1003-03N | Bolt, rear engine mount to bracket/transmission | M8 | Nm | - |
| M10 | Nm | 50 | ||