Prepare Panoramic Sliding Roof Frame Body Flange For Installation - AR77.21-P-0801-03LWE

Model 213 

with code 413 (Automatic panoramic sliding sunroof) 

1. Cut down present adhesive beads (1) on body flange (2) to a remaining height of approx. 1 to 2 mm using scraper.
2. Remove cutting residues from body flange (2).
3. Repair paint damage on body flange (2).

   Use only primer filler approved by Daimler AG.

4. Clean adhesive beads (1) on body flange (2) with cleaner.

   The cleaner is included in the repair kit.

5. Apply activator to body flange (2).

   Apply activator only after drying has dried.

   Otherwise the strength of the adhesive connection can be impaired and proper adhesion of the adhesive material is not ensured.

   The activator is included in the repair kit.

   Courtesy of MERCEDES-BENZ USA