Retrofit Touchpad Wiring Harness - AN82.60-P-0017-01FR

Model 257 

Depending on the equipment variant involved, a different number of electrical connector sockets may be present on the touchpad wiring harness.

1. Remove old wiring harness for touchpad (6) from center console cover.

   The old touchpad wiring harness (6) is no longer required.

2. Connect white 6-pin connector socket (6.1) of new touchpad wiring harness (6) to touchpad (A105).
3. Connect blue 6-pin connector socket (6.2) of touchpad wiring harness (6) to right lower control panel (N72/5).

   A red/yellow line is installed in clamp "1" of the blue 6-pin connector socket (6.2).

4. Connect blue 6-pin connector socket (6.3) of touchpad wiring harness (6) to left lower control panel (N72/4).

   A red/white line is installed in clamp "1" of the blue 6-pin connector socket (6.3).

5. Connect white 20-pin connector socket (6.4) of touchpad wiring harness (6).

   The white 8-pin connector socket (6.5) is connected when the center console cover is installed.

   This establishes the electrical connection for the front center console (X138/1).

   Courtesy of MERCEDES-BENZ USA