Remove/Install Left Rear Seat Belt Buckle - AR91.40-P-1526MFA

Model 118, 177, 243.6/7, 247

Shown on model 177 with code U01 (Rear seat belt status display in instrument cluster)

G16152316

Courtesy of MERCEDES-BENZ USA

Notice	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Remove rear seat cushion.	Model 243.6	AR91.12-P-1021EQB
		Model 118, 177, 243.7, 247	AR91.12-P-1021MFA
2	Release and disconnect electrical connector (3).	Model 118, 177, 243.6/7, 247 with code U01 (Rear belt status indicator)
3	Unscrew screw (4).	Screw/nut, seat belt end fitting/rear seat belt buckle to body	*BA91.40-P-1006-01X
4	Remove left seat belt buckle (1).	Check for correct installation position of seat belt end fitting with seat belt strap (2) and left seat belt buckle (1).
5	Install in the reverse order.

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 118	Model 177
BA91.40-P-1006-01X	Screw/nut, seat belt end fitting/rear seat belt buckle to body	Nm	35	35

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 243	Model 247
BA91.40-P-1006-01X	Screw/nut, seat belt end fitting/rear seat belt buckle to body	Nm	35	35