Press In Pilot Bushing - AR41.10-P-0250-03MFC
Model 118, 177, 247
with code M005 (Vehicles with 4MATIC/all-wheel drive)
CHECK VALUES FOR PILOT BUSHING ON PROPELLER SHAFT
| Number | Designation | Model 118, 177, 247 | ||
|---|---|---|---|---|
| BE41.10-P-1001-04H | Press-in dimension "a" from face end of pilot bushing to joint flange | Rear propeller shaft | mm | 25, 0...25, 3 |
- Press in new pilot bushing using a suitable drift.
Observe the pressing-in dimension (a) from the front of the pilot bushing to the flange. The specified press-in distance (a) may deviate depending on the thickness of the flexible couplings, e.g. in vehicles with vibration damper. Then consider the press-in dimension (a) measured prior to removal for installation.