LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2020 >> CLA35 AMG >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seats, Bunks, Restraint Systems (2 Of 2) -- 118 Chassis >> Testing & Repair >> Remove/Install Outer Trim On Seat Frame >> Remove/Install Outer Trim On Seat Frame - AR91.10-P-1201MFA

Remove/Install Outer Trim On Seat Frame - AR91.10-P-1201MFA

Model 118, 177, 247 

except code 555 (AMMG-Performance Seat) 

Model 243 

G16053396Courtesy of MERCEDES-BENZ USA

Shown on model 177 without code 275 (Electrically adjustable driver's seat with memory function) 

Notice  Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
REMOVINGINSTALLING Remove/install     
1 Move front seat forward and fully upwards.    
2 Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).    
3 Remove screw (7) from trim (1).    
  Except code 241 (Memory gearshift system for electrically adjustable front passenger seat on left) or except code 242 (Electrically adjustable front passenger seat with memory function) or except code 275 (Electrically adjustable driver's seat with memory function) or except code U59 (Seat Comfort Package)     
4 Pry off handwheel (2).    
5 Pry off handwheel (3).    
6 At the bore (arrow a) release the cover (4) with the extraction hook (S) and unclip using assembly wedge (K). SPECIAL TOOL Extraction hook Fig 1
7 Release catch hook (6) on adjustment lever (5) and remove adjustment lever (5). NOTES Release catch hook (6) carefully.
Otherwise, the catch hooks (6) may be damaged.
 
8 Release outer trim (1) in rear area. NOTES Carefully detach outer cover (1).
Otherwise, the guide lugs (10) may be damaged.
 
9 Release catch hooks (arrows b) on guide pin (8) and push guide pin (8) of outer trim (1) out of the guide in the seat frame base.    
10 Release outer trim (1) and remove carefully.    
11 Release and disconnect electrical connector (9) driver's seat lumbar support adjustment switch (S109/2) or front passenger seat lumbar support adjustment switch (S109/3). Model 118, 177, 247 with code U22 (Lumbar support adjustment) except code 555 (AMG-Performance Seat)
Model 243 with code U22 (Lumbar support adjustment)
 
12 Remove driver's seat lumbar support adjustment switch (S109/2) or front passenger seat lumbar support adjustment switch (S109/3). Model 118, 177, 247 with code U22 (Lumbar support adjustment) except code 555 (AMG-Performance Seat) Model 243
with code U22 (Lumbar support adjustment) When replacing outer cover (1).
 
      AR91.25-P-1436MFA 
13 Install in the reverse order.    
Fig 1: Identifying Extraction Hook (140 589 02 33 00)
G11128914Courtesy of MERCEDES-BENZ USA