Remove/Install License Plate Lamps - AR82.10-P-5161MFC

Model 118.3/6 

Shown on model 118.3 

Fig 1: License Plate Lamps Components Location - Model 118.3

Courtesy of MERCEDES-BENZ USA

	Remove/install
Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
1	Release catch hook (2) from below using a suitable screwdriver and remove left license plate lamp (E19/1) or right license plate lamp (E19/2).	Carefully release and move out. Otherwise paint damage can occur.
2	Release and disconnect electrical connector (1) on left license plate lamp (E19/1) or right license plate lamp (E19/2).
3	Install in the reverse order.