Charge Air Pipe/Charge Air Cooling - BA09.41-N-1000-01O
Engine 642
| Number | Designation | Engine 642 | ||
|---|---|---|---|---|
| BA09.41-N-1001-01O | Bolt, charge air line for exhaust gas turbocharger to bracket | Nm | 9 | |
| BA09.41-N-1002-01O | Bolt, bracket to charge-air distributor | Nm | 9 | |
| BA09.41-N-1003-01O | Bolt from turbocharger noise damper to holder | Nm | 9 | |
| BA09.41-N-1004-01O | Bolt, charge air line upstream of charge air cooler to cylinder head cover | Nm | 9 | |
| BA09.41-N-1005-01O | Bolt, charge air line upstream of charge air cooler to bracket | Nm | 9 | |
| BA09.41-N-1006-01O | Bolt, charge air line upstream of charge air cooler to engine carrier | Nm | 9 | |
| BA09.41-N-1007-01O | Bolt, fitting to throttle valve actuator | Nm | 9 | |
| BA09.41-N-1008-01O | Bolt, throttle valve actuator holder to cylinder head | Nm | 9 | |
| BA09.41-N-1009-01O | Bolt, throttle valve actuator to mixer housing | Nm | 5 | |
| BA09.41-N-1010-01O | Screw/bolt, charge air distributor to cylinder head | Nm | 16 | |
| BA09.41-N-1011-01O | Bolt, boost pressure sensor to mixer housing | Nm | 6 | |
| BA09.41-N-1012-01O | Screw/bolt, mixing chamber to charge air distributor | M6 | Nm | 9 |
| BA09.41-N-1013-01O | Bolt, mixing chamber to support brace | M8 | Nm | 20 |
| BA09.41-N-1014-01O | Nut, mixer housing to charge-air distributor | M6 | Nm | 9 |
| BA09.41-N-1015-01O | Bolt, noise damper upstream of charge air cooler to holder | Nm | 6 | |
| BA09.41-N-1016-01O | Bolt, noise damper upstream of charge air cooler to oil filter housing | Nm | 12 | |
| BA09.41-N-1017-01O | Bolt, charge air pipe to exhaust gas turbocharger to charge-air distributor | Nm | 12 | |
| BA09.41-N-1018-01O | Bolt, noise damper downstream of charge air cooler to mixer housing/holder for glow output stage | Nm | 9 | |
| BA09.41-N-1019-01O | Screw, left/right charge-air distributor to left/right cylinder head | Nm | 18 | |