SCN Coding Of Control Units - Ar54.21-D-0015TS
Model 907
| Notes on SCN coding of control units | AH54.21-P-0004-01X | ||
| SCN (Software Calibration Number) coding | |||
| 1 |
Connect vehicle diagnosis system and run XENTRY Diagnostics (XD). | Sufficient power supply to the vehicle on-board electrical system must be ensured throughout the entire work procedure. Otherwise any undervoltage that occurs may damage the control units. If the power supply of the on-board electrical system provided by the on-board electrical system battery is insufficient, ↓ connect a charger. |
AD00.00-D-2000-06TS |
| AR54.10-D-1127TS | |||
| 2 | Perform SCN coding. | ||
| 3 | Read out and delete fault memory. | ||
| 4 |
Disconnect diagnostic system. | AD00.00-D-2000-06TS |