Processing Of Body Sealant (PAINTABLE) Before Painting - Ar97.10-D-0500-02TS

Model 907 

Use suitable tools such as brushes and wooden spatulas to apply the body sealant. Only clean these tools with pure benzine.

If these tools are cleaned with paint thinner or other alcohol-containing fluids, the body sealant will not cure and will remain sticky. The adhesive effect of the paintwork is thus impaired.

When replacing sheet metal detachable parts (doors, dropside, hood) as well as welded-in body panels, carefully seal the folds and openings with body sealant. Seal the spot weld seams and riveted joints on both sides.

Prevent corrosion and leakage.

Please proceed as follows for this purpose:

1. Carefully clean affected body parts.
2. Apply body sealant uniformly.
3. Apply body sealant evenly.

   Observe drying time before overpainting.