Cavity Preservation Following Repair Work - Ar97.20-D-1500TS

Model 907 

Processing variants for cavity preservations 

Engine hood area 

Fender area, shown on right fender 

Front door area, shown on left front door 

Sliding door area, shown on right sliding door 

Rear-end door area 

Front area, shown view from left 

Area, left side of vehicle 

Area, right side of vehicle 

Rear area 

Underbody area, shown on model 907 

Picture no., etc.	Work notes
	Risk of explosion and poisoning  caused by solvent vapors and gasses. Risk of injury  to skin and eyes when working with anticorrosion agents	Never spray corrosion protection on flames or hot, glowing objects and keep them well away from all potential sources of ignition. Use them only in well-ventilated rooms; wear respiratory protection.	AS97.00-Z-0001-01A
Topical note	Notes on cavity preservation		AH97.20-P-0001-01B
A	Cavity preservation in bead area
	000 588 01 72 00 Sealing and corrosion protection gun		WS97.00-N-0002B
		Apply cavity preservation with spraying hose and nozzle (spraying angle 360°) as far as possible into cavities. Cavity preservation (free of solvents), 1 liter	*BR00.45-Z-1003-05A
B	Inner surface, cavities and gaps	Uniformly moisten with cavity preservation. Cavity preservation (free of solvents), 1 liter	*BR00.45-Z-1003-05A

Number	Designation	Order number
BR00.45-Z-1003-05A	Cavity preservation (free of solvents), 1 liter	A 000 986 72 70 10