PARAMETERIZABLE Special Module (PSM) Signals - GF54.21-D-0002-05TSA

Model 907 

with code ED5 (Parameterisable special module) 

The signal list is part of the documentation for the parameterizable special module (PSM), it can also be displayed in XENTRY Diagnostics. The following steps must be performed for display in XENTRY Diagnostics:

• In XENTRY Diagnostics, select the parameterizable special module (PSM) control unit (N26/15).
• Call up the information on the PSM control unit (i.e. press the button with the book symbol)
• Select the "Help for control unit" tab.
• Select the menu item "Signal list".

  The signal list can be displayed in two different formats:

• Display of entire signal list
• Display of signal list in categories

If "Signal list displayed in categories" is selected, the signals are grouped in the following categories:

• Internal information of PSM control unit
• Vehicle equipment
• State of vehicle
• Inputs
• Analog inputs
• Analog/digital converter
• Outputs
• Pulse width modulated (PWM) signal
• Illumination and signaling horn
• Central locking
• Wiping, washing and heating of windows
• Displays in instrument cluster
• Further data from interior CAN
• Engine CAN
• Body manufacturer CAN
• Working speed control
• Power take-off
• Engine start and engine stop
• Speed limit
• Engine run-on
• Electric step
• Programmable logic controller (PLC)