000 588 00 23 00 Adjusting Gauge - WS82.00-P-0028B

Model all 

Used in FG 54/67/82/Set B 

Purpose: 

Calibration target for adjusting the camera of driver assistance systems.

Testing equipment category CAT_A.

Technical note: 

Application in combination with a headlamp aimer or other suitable tripod.

Procurement information: 

This workshop equipment is not distributed through the regular replacement part ordering process in GLC/LC, but directly from the manufacturer/supplier. Recommended workshop equipment and information on the manufacturers/suppliers can be found in the WS document (see below).

Manufacturer 

ROMESS Rogg Apparate + Electronic GmbH & Co. KG

Dickenhardtstr. 67

78054 VS-Schwenningen

Germany

• Type/model: Calibration target for Night View Assist

  Article no.: 09840-10

• Accessories: Adaptation for Hella headlamp aimer (45° rotated bracket).

  Article no.: 09840-11