LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> Sprinter 3500XD 2D Cab Chassis >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Electrical System, Equipment & Instructions - Test & Adjustment Values, Maintenance, Retrofitting & Conversion >> Maintenance >> Signaling System And Indicator Lamps - Function Check - AP54.00-D-5451TS

Signaling System And Indicator Lamps - Function Check - AP54.00-D-5451TS

Model 907 

WARNING Risk of accident from vehicle starting off by itself when engine running. Risk of injury  (bruises and burns) resulting from working on the engine while it is being started or when it is running. Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. AS00.00-Z-0005-01A
INSPECT Check     
1 Apply parking brake.    
2 Switch on ignition.    
3 Check indicator lamps. If indicator lamp is defective,

Determine cause and rectify fault.
IMPORTANT After obtaining special order.
AP54.00-D-5451-01TS 
4 Check horn. If horn is defective,

Determine cause and rectify fault.
IMPORTANT After obtaining special order.
 
5 Check instrument lighting and brightness control for correct function. If the instrument lighting or brightness control is defective.

Determine cause and rectify fault.
IMPORTANT After obtaining special order.
 
6 Check interior lighting. If interior lighting is defective.

Determine cause and rectify fault. IMPORTANT After obtaining special order.
AP54.00-D-5451-03TS 
7 Switch off ignition.