Remove/install rear axle headlamp range adjustment sensor - AR82.10-P-4084W
MODEL 172.4 with CODE (615) Bi-xenon headlamp unit with integrated curve illumination with CODE (621) Intelligent Light System (left-hand traffic) with CODE (622) Intelligent Light System (right-hand traffic)
| Remove/install | |||
| 1 | Lift vehicle on lifting platform. | AR00.60-P-1000V | |
| 2 | Unclip lines (1) from bracket (2) and remove bracket (2) | ||
| 3 | Disconnect electrical connector (3) from left rear level sensor (B22/7) and unclip electrical line (4) from bracket (6) | ||
| 4 | Unscrew nut (5) from holder (6) | ||
| 5 | Detach clip (8) from cross strut (7) | ||
| 6 | Remove the left rear level sensor (B22/7) | ||
| 7 | Install in the reverse order | ||
| 8 | Connect STAR DIAGNOSIS and adjust zero position of headlamps | AD00.00-P-2000-04A | |
| 9 | Check headlamp setting and correct if necessary | AP82.10-P-8260V |