Self-Test For Fire Extinguishing System - AR86.10-P-0101-01LFS
Model 222
With Code Z21 (Fire extinguishing system)
- Open flap (1).
- Switch on ignition (transmitter key in position "2").
The self-test of the fire extinguishing system is performed automatically.
If the fire extinguishing system functions properly, the LEDs in the emergency fresh air system/fire extinguishing system activation button (S62/41) and fire extinguishing system button (S62/29) come on for 10 s. The fire extinguishing system warning buzzer does not sound. The fire extinguishing system is ready for function.
If the fire extinguishing system does not function properly, the LEDs in the emergency fresh air system/fire extinguishing system activation button (S62/41) and fire extinguishing system button (S62/29) illuminate continuously and the fire extinguishing system warning buzzer sounds. The fire extinguishing system is not ready for function.
- Switch off ignition.
- Close flap (1).