Check Wiper Arms - AR82.30-P-6000-01LC
Model 166 As Of 8/25/11
Model 217, 231, 292
Model 222
With Code 874 (MAGIC VISION CONTROL inch. Heated windshield washer system)
| Number | Designation | Model 166 | Model 292 | ||
|---|---|---|---|---|---|
| BE82.30-P-1001-01J | Angle of incidence of driver-side wiper arm in reversing position | Left-hand drive vehicle | ∠° | -2, 0...-6, 0 | -2, 3...-6, 3 |
| Right-hand drive vehicle | ∠° | +2, 0...+6, 0 | +2, 3...+6, 3 | ||
| Number | Designation | Model 231 | ||
|---|---|---|---|---|
| BE82.30-P-1001-01L | Angle of incidence of wiper arm on driver-side in reversing position | Left-hand drive vehicle | ∠° | -2...-4 |
| Right-hand drive vehicle | ∠° | +2...+4 | ||
| Number | Designation | Model 217 | Model 222 | ||
|---|---|---|---|---|---|
| BE82.30-P-1001-01M | Angle of incidence of driver-side wiper arm in reversing position | Left-hand drive vehicle | ∠° | -2, 4...-3, 0 | -2, 4...-3, 0 |
| Right-hand drive vehicle | ∠° | +2, 4...+3, 0 | +2, 4...+3, 0 | ||
| Number | Designation | Model 166 | Model 292 | ||
|---|---|---|---|---|---|
| BE82.30-P-1002-01J | Angle of incidence of passenger-side wiper arm in reversing position | Left-hand drive vehicle | ∠° | -4, 0...-8, 0 | -1, 5...-5, 5 |
| Right-hand drive vehicle | ∠° | +4, 0...+8, 0 | +1, 5...+5, 5 | ||
| Number | Designation | Model 231 | ||
|---|---|---|---|---|
| BE82.30-P-1002-01L | Angle of incidence of passenger-side wiper arm in reversing position | Left-hand drive vehicle | ∠° | -1...-3 |
| Right-hand drive vehicle | ∠° | +1...+3 | ||
| Number | Designation | Model 217 | Model 222 | ||
|---|---|---|---|---|---|
| BE82.30-P-1002-01M | Angle of incidence of passenger-side wiper arm in reversing position | Left-hand drive vehicle | ∠° | -4, 0...-4, 2 | -4, 0...-4, 2 |
| Right-hand drive vehicle | ∠° | +4, 0...+4, 2 | +4, 0...+4, 2 | ||
| Number | Designation | Model 166 | Model 292 | ||
|---|---|---|---|---|---|
| BE82.30-P-1003-01J | Angle of incidence of driver-side wiper arm in parked position | Left-hand drive vehicle | ∠° | +2, 0...+6, 0 | +1, 1...+5, 1 |
| Right-hand drive vehicle | ∠° | -2, 0...-6, 0 | -1, 1...-5, 1 | ||
| Number | Designation | Model 231 | ||
|---|---|---|---|---|
| BE82.30-P-1003-01L | Angle of incidence of driver-side wiper arm in parked position | Left-hand drive vehicle | ∠° | +3...+5 |
| Right-hand drive vehicle | ∠° | -3...-5 | ||
| Number | Designation | Model 217 | Model 222 | ||
|---|---|---|---|---|---|
| BE82.30-P-1003-01M | Angle of incidence of driver-side wiper arm in parked position | Left-hand drive vehicle | ∠° | +3, 6...+5, 4 | +3, 6...+5, 4 |
| Right-hand drive vehicle | ∠° | -3, 6...-5, 4 | -3, 6...-5, 4 | ||
| Number | Designation | Model 166 | Model 292 | ||
|---|---|---|---|---|---|
| BE82.30-P-1004-01J | Angle of incidence of passenger-side wiper arm in parked position | Left-hand drive vehicle | ∠° | +4, 0...+8, 0 | +1, 8...+5, 8 |
| Right-hand drive vehicle | ∠° | -4, 0...-8, 0 | -1, 8...-5, 8 | ||
| Number | Designation | Model 231 | ||
|---|---|---|---|---|
| BE82.30-P-1004-01L | Angle of incidence of passenger-side wiper arm in parked position | Left-hand drive vehicle | ∠° | +3...+5 |
| Right-hand drive vehicle | ∠° | -3...-5 | ||
| Number | Designation | Model 217 | Model 222 | ||
|---|---|---|---|---|---|
| BE82.30-P-1004-01M | Angle of incidence of passenger-side wiper arm in parked position | Left-hand drive vehicle | ∠° | +3, 4...+5, 6 | +3, 4...+5, 6 |
| Right-hand drive vehicle | ∠° | -3, 4...-5, 6 | -3, 4...-5, 6 | ||
- Move wiper arms (1) to reverse position.
- Remove angle gauge (A) from the
adjustment tool set.
Insert adapter (B) into guide of angle gauge (A) and fix in place with screw/bolt at angle gauge (A).
Slide adapter (B) together with angle gauge (A) onto wiper blade mount of wiper arm (1) to be adjusted and attach with screw/bolt.
- Lower wiper arm (1) to be adjusted carefully onto windshield.
All three contact points at the foot of the angle gauge (A) must make contact with the windshield.
- Read off the angle of incidence of the wiper arm (1) to be adjusted on the scale of the angle gauge (A), note down and compare to the corresponding specified value. Model 166 as of 8/25/11
Model 292
Model 166 as of 8/25/11
Model 292
Model 217
Model 222
with code 874 (MAGIC VISION CONTROL inch. Heated windshield washer system)
Model 217
Model 222
with code 874 (MAGIC VISION CONTROL inch. Heated windshield washer system)
Model 231
Model 231
- Raise wiper arm (1) to be adjusted and remove
adapter (B) together with angle gauge (A).
- Raise wiper arms (1), cover with appropriate aids (scratch protection) and set down on windshield.
When changing from reversing position to parked position, ensure that the wiper arms do not make direct contact with the windshield.
Otherwise, the windshield may be scratched.
- Move wiper arms (1) to park position and remove aid (scratch protection) from wiper arms (1).
Shown on driver-side wiper arm (1)
- Repeat test procedures 3 to 6 at the wiper arm (1) to be adjusted in parked position. Model 166 as of 8/25/11 Model 292
Model 166 as of 8/25/11
Model 292
Model 217
Model 222
with code 874 (MAGIC VISION CONTROL inch. Heated windshield washer system)
Model 217
Model 222
with code 874 (MAGIC VISION CONTROL inch. Heated windshield washer system)
Model 231
Model 231
Shown on driver-side wiper arm (1)