Remove/Install Rear Seat Cushion Cover - AR91.18-P-1850LF

Model 222.0/1

except code 223 (Electric backrest adjustment and head restraints)

except code 224 (Individual rear seats)

Courtesy of MERCEDES-BENZ USA

Shown on rear seat cushion with CODE 872 (Seat heater in rear)

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove rear seat cushion		AR91.12-P-1020LF
2	Unhook cover (1) on rear side of padding (2) (arrows A, arrows B)
3	Slip cover (1) over padding (2)
4	Guide electrical lines (3) through cover (1)	If installed.
5	Unhook staple wires (5) of cover (1) from clips (4) at seat surface side of padding (2) using a suitable screwdriver	Do not damage clips (4). Otherwise the padding (2) must be replaced.
6	Remove cover (1) from upholstery (2)	: Ensure that cover (1) is seated correctly on padding (2).
7	Pull staple wires (5) out of cover (1)	When replacing cover (1). : Insert staple wires (5) in new cover (1).
8	Install in the reverse order