Wiring Diagram Of Reversing Camera - PE54.65-P-2103-97SEA
Model 217 up to model year 2018 with code 218 (Rear view camera) Control unit B84/3
Model 222 up to model year 2018 with code 218 (Rear view camera) Control unit B84/3
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Use of wiring diagrams | 15L |
| A40/3 | COMAND control unit | 11L |
| B84/3 | Backup camera | 4A |
| B84/3 | Backup camera | 13A |
| CAN HMI | User interface CAN | 7K |
| K40/5 | Rear fuse and relay module | 3L |
| K40/5f409 | Fuse 409 | 2L |
| U1217 | Valid for model series 217 | 9D |
| U1222 | Valid for model series 222 | 2D |
| U1222 | Valid for model series 222 | 9C |
| U413 | Valid for model 217.3 | 2D |
| U414 | Valid for model 217.4 | 2D |
| W6/1 | Left tail lamp trunk ground point | 3E |
| W7/1 | Right tail lamp trunk ground point | 3F |
| X18/35 | Cockpit wiring harness and frame floor assembly electrical connector | 7E |
| X30/20 | User interface CAN (CAN HMI) potential distributor electrical connector | 7L |