000 588 13 21 00 Wheel Alignment System - WS40.00-P-0013B
Model All (4xWD, CAR, Light transporter, smart)
Use in FG 40/Set B
Purpose:
Car suspension measuring unit for measuring suspension geometry.
Test equipment category CAT_B.
Procurement information:
This workshop equipment is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier are available in the maintenance system document (see below).
- Electronic with 3D camera technology
- Electronic with radio frequency
The suspension geometry on heavy-duty vans from Mercedes-Benz can also be measured using the wheel alignment systems listed below.
Manufacturer 1:
Corghi S.p.A.
S.S.468, n° 9
42015 Correggio Reggio Emilia
Italy
http://www.corghi.de
- Type/model: Exact 7000MB
Article no.: 0-33107201/31
Manufacturer 2:
Hunter Deutschland GmbH
BeurerstraBe 25a
86926 Greifenberg am Ammersee
Germany
http://de.hunter.com/oem/Mercedes-Benz
- Type/model: HTA-MB-TD
Article number: HTA-MB-TD
Manufacturer 3:
Snap-on Equipment srl via per Carpi 33
4201 Correggio
Italy
https://eu.johnbean.com
https://eu.hofmann-equipment.com
- Type/model: John Bean - V3400 MB-1
Article no.: EEWA553MB1
- Type/model: Hofmann - geoliner 790 MB-1
Article no.: EEWA753MB1
Manufacturer 4:
Ravaglioli SPA
Sasso Marconi fraz. Pontecchio
40037 Bologna
Italy
https://www.ravaglioli.com
- Type/model: Ravaglioli - RAVTD3000HPMB
Article no.: RAVTD3000HPMB
- Type/model: Butler - SPEED3DHPMB
Article no.: SPEED3DHPMB
- Type/model: Space - ARP3DHPMB
Article no.: ARP3DHPMB
Manufacturer 5:
BlitzRotary GmbH
Hufinger Str. 55
78199 Braunlingen
Germany
https://www.BRBunited.com
- Type/Model: RWATD3000HPMB
Article no.: RWATD3000HPMB