Secure Vehicle On Vehicle Lift - AR00.60-P-0100CW
Model 117, 156, 176, 204, 205, 207, 213, 217, 222, 238, 242, 246, 253
Shown with model 204.0
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Remove | |||
| 1 | Remove screws (2) from vehicle lift support points (1). | When removing the bolts (2), the expansion clamps for the vehicle lift support points (1) drop down into the longitudinal members. |
|
| 2 | Pry out vehicle lift support points (1) from longitudinal members. | Do not use sharp-edged tools. Otherwise this can result in damage to the longitudinal member. Remove expansion clamps for the vehicle lift support points (1) from longitudinal members and mount using bolts (2) to vehicle lift support points (1). Screw bolts (2) a few turns only into expansion clamps. |
|
| Install | |||
| 3 | Insert vehicle lift safety devices (01) into longitudinal members. | The |
|
Vehicle lift safety device |
Fig 2 | ||
Vehicle hoist securing tool |
Fig 1 | ||
| 4 | Swivel levers (01 a) of vehicle lift safety devices (01) to the right. | ||
| 5 | Adjust support plates (4) of vehicle lift support arms (3) to the level of the vehicle lift safety devices (01) or the level of the remaining vehicle lift support points (1). | ||
| 6 | Lift vehicle with lifting platform. | Model 117, 156, 176, 204, 205, 207, 213, 217, 222, 238, 242, 246, 253 | |
| Model 205, 213, 238, 253 | AR00.60-P-1002LWG | ||
| Model 217, 222 | AR00.60-P-1000LF | ||
| Model 117, 156, 176, 242, 246 | AR00.60-P-1000AK | ||
| 7 | Secure vehicle lift safety devices (01) using tensioning straps at the vehicle lift support arms (3). |