Disconnect/Connect Engine Wiring Harness - AR15.18-P-1000-03XGI
Engine 176 in model 217, 222
Engine 176 in model 463
as of model year 2019
ENGINE WIRING HARNESS
| Number | Designation | Engine 176 | |
|---|---|---|---|
| BA15.18-P-1003-01G | Screw, cable duct to cylinder head cover/charge air cooler/heat shield, right | Nm | 9 |
- Remove soundproofing (3).
- Unscrew screws (4)
at cable ducts (5).
- Remove cable ties (2).
: Install new cable ties (2).
- Release and disconnect electrical connectors (1).
Shown on the left side of the engine
- Remove cable ducts (5) with electrical wiring harnesses
and place outside the working area.
Do not crush or kink or subject electric lines to tension. This will result in damage to the electric lines and can impair their function.
Shown on right side of engine