Pull Off/Press On Propeller Shaft Intermediate Bearing - AR41.40-P-0002-02LF

Model 217 

Model 222 

Fig 1: Identifying Drift (126 589 03 15 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Puller, Two-Arm (000 589 88 33 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Removal And Installation Tool (203 589 01 43 00)

Courtesy of MERCEDES-BENZ USA

Fig 4: Identifying Puller Arms (129 589 00 34 00)

Courtesy of MERCEDES-BENZ USA

detach 

1. Position puller arms (011) of puller (010) on the inner race of ball bearing.
2. Detach propeller shaft center support bearing (1) from joint fork.

   Courtesy of MERCEDES-BENZ USA

3. Press new propeller shaft center support bearing (1) on to joint fork.

   Use drift (012) and sleeve 203 589 01 43 01 (013) extraction and insertion tools .

Courtesy of MERCEDES-BENZ USA