Notes On Avoiding Damage To Windows Installed In Special High-Security Vehicles - AH67.00-P-0003-01FB

Model 166

with code Z04 (Light armoring)

Model 166

with code Z05 (B5 armoring on special protection version)

Model 210

with code Z04 (Light armoring)

with code Z06 (B6 armoring)

Model 211

with code Z04 (Light armoring)

Model 212

with code Z04 (Light armoring)

Model 220

with code Z04 (Light armoring)

with code Z07 (B7 armoring on special protection version)

Model 221.1

with code Z07 (B7 armoring on special protection version)

Model 222, 223

with code Z07 (B7 armoring on special protection version)

Model 461

with code ZS4 (Special protection version FB4)

with code ZS6 (Special protection version FB6)

with code ZS7 (Special protection version FB7)

Model 463

with code 979 (Special protection MB Guard)

with code ZS4 (Special protection version FB4)

Model 463

with code 979 (Special protection MB Guard)

with code ZS6 (Special protection version FB6)

Model 463

with code 979 (Special protection MB Guard)

with code ZS7 (Special protection version FB7)

Model 463

with code ZS8 (Protection class VR7/glass area VR9)

The inside of these windows have a plastic coating which is very sensitive to scratching. Even with the smallest case of damage, protection can no longer be guaranteed.

Observe the following instructions to avoid damage:

Do not affix any adhesive labels.
Avoid any contact with hard objects (ice scrapers, rings, watches, armbands, etc.).
Do not use deicing sprays.
Do not clean dry.

When working in the area of these windows:

Cover inside of windows with suitable foil.
Cover sharp edges on doors and on the window frame.
Always reinstall bolts removed at the same place they were removed.
Ensure that new bolts are always identical to those installed previously.

When cleaning windows:

Use only water for cleaning, possibly adding a small amount of mild dishwashing liquid or soap.
Clean using only a chamois leather and minimal pressure.