Remove/Install Trim Strip Behind Rear Seat - AR68.30-P-1460LF

Model 222.0/1/9 

with code 223 (Electric backrest adjustment and head restraints) 

Model 222.1/9 

with code 224 (Individual rear seats) 

Shown with code 223 (Electrically adjustable rear bench seat) 

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

Shown with code 223 (Electrically adjustable rear bench seat) 

Shown with code 224 (First class, rear) 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Move backrest to front-most position
2	Unclip belt guides (1.1, 2.1 and 3.1)	Belt guides (1.1, 2.1 and 3.1) are clipped at side and bottom.
3	Unclip trim strip (1) and disconnect interior lamp (4) from optical fiber (5)
4	Unclip trim strip (3) and disconnect interior lamp (4) from optical fiber (5)
5	Remove screw/bolts (6)
6	Unclip trim strip (2) and disconnect interior lamp (4) from optical fiber (5)	Model 222.0/1/9 with code 223 (Electric backrest adjustment and head restraints) : Observe position of pins (8) on optical fiber (5) in relation to hole (7) on interior lamp (4).
7	Open cover on top rear center console	Model 222.1/9 with code 224 (Individual rear seats)
8	Remove screw/bolts (9)	Model 222.1/9 with code 224 (Individual rear seats)
9	Unclip trim piece (10) at top and disconnect interior lamp (4) from optical fiber (5)	Model 222.1/9 with code 224 (Individual rear seats) : Observe position of pins (8) on optical fiber (5) in relation to hole (7) on interior lamp (4).
10	Unclip trim piece (11) at top and disconnect interior lamp (4) from optical fiber (5)	Model 222.1/9 with code 224 (Individual rear seats) : Observe position of pins (8) on optical fiber (5) in relation to hole (7) on interior lamp (4).
11	Transfer optical fiber (5)	When replacing trim piece (1, 2, 3, 10, 11).
12	Install in the reverse order