Remove/Install Paneling On B-Pillar - AR68.30-P-4700LF
Model 222.0/1/9
| Remove/install | |||
| 1 | Move front seat to end position toward front | ||
| 2 | Remove edge guard (3) in area of top, lower B-pillar paneling (1, 1.2) | ||
| 3 | Unclip cover (2) | ||
| 4 | Unscrew nut (4) | *BA68.30-P-1001-01E | |
| 5 | Unclip top B-pillar paneling (1) | ||
| 6 | Remove belt end fitting | AR91.40-P-1030-02LF | |
| 7 | Guide seat belt through opening on top B-pillar paneling (1) | ||
| 8 | Remove top B-pillar paneling (1) from vehicle interior | ||
| 9 | Remove door sill (5, 6) | When removing bottom B-pillar paneling (1.2) | |
| 10 | Unclip bottom B-pillar paneling (1.2), lift slightly and remove upward | ||
| 11 | Transfer air vent | When replacing top B-pillar paneling (1) | |
| 12 | Install in the reverse order |
PANELING, TRIM PIECE
| Number | Designation | MODEL 222 | |
|---|---|---|---|
| BA68.30-P-1001-01E | Nut, B-pillar trim to body | Nm | 5 |