Remove/Install Front Door Control Unit - AR72.29-P-1001LFS
Model 222.1
with code Z07 (B7 armoring on special protection version)
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Intermediately store basic date of front door control unit (1) in diagnostic equipment | When replacing front door control unit (1). | |
| AD00.00-P-2000-04B | |||
| 2 | Switch off ignition and remove transmitter key or KEYLESS-GO stop/start button | ||
| 3 | Remove front door lining | AR72.10-P-1000LF | |
| 4 | Disconnect electrical connectors (3) from front door control unit (1) | ||
| 5 | Unclip front door control unit (1) from bracket (2) and remove | ||
| 6 | Install in the reverse order |